Dimensional Equipment Price List

SKU Equipment Description Price ($)
A1 AGD Indicators Up to 1” travel 25
    Up to 3” 35
    Up to 5” 55
A2 Angle Blocks All 18
A3 1-2-3 Blocks All 30
A4 Angle Plates 8”- 12” 50
    12”- 18” 65
A5 Ball Gage Set Per Pair 55
A6 Bench Micrometer All 180
A7 Bore Gage Dial/ Digital Up to 8” 60
    9”-14” 65
A8 Bore Head   30
A9 Bore Gun   45
A10 Caliper (Dial) 0- 12” 25
    12”- 24” 65
    24”- 40” 90
    40”- 60” 140
    60”-80” 175
    80”-120” 190
A11 Caliper (Digital) 0- 12” 30
    12”- 24” 70
    24”- 40” 95
    40”- 60” 145
    60”-80” 180
    80”-120” 195
A12 Caliper Gage All 65
A13 Caliper/Depth/Mic  Master Per Reading 15
A14 Center finder All 40
A15 Centrifuge All 150
A16 Chart Recorder Temperature 120
    Temp/Humidity 180
    Pressure 120
    Temp/Pressure 180
A17 Chamfer Gage All 55
A17B Coax Indicator All 40
A18 Crimping tool Crimper 65
A19 Cylindrical Plugs Up to 4” 45
    Up to 8” 75
    9” and higher 90
A20 Cylindrical Plugs Up to 2” 30
    3” to 4” 35
    5” to 6” 40
    7” to 8” 75
    9” and up 90
A21 Depth Micrometer 0-1” 30
    0-4” 60
    0-6” 80
    0-9” 95
    0-12” 105
A22 Depth Gage (Bu^ress/Thread/API) 0 - 12” 30
    12” - 24” 35
    24” – 36” 45
A23 Deflectometer All Call
A24 Dial Indicators All 28
A25 Dial Caliper Gage – Frog Legs All 35
A26 Durometer ALL 95
A27 Feeler/Filet/Axle  Gage Per Leaf 4
A27B Flaw Detectors Ultrasonic 185
  Force Gage All 60
A28 Gage Blocks Minimum Set 60
    Per Block 4.50
    5-20” Long set 310
    36 pc. Set 162.00
    81 pc. Set 364.5
A29 Gauss Meter/Magnetometer 10, 20 & 50 55
A30 Groove Gage Up to 6” 30
    Up to 24” 35
    Up to 30” 45
A31 Hardness Tester Brinell 250
    Rockwell 250
    Equidp/hardp 300
A32 Height Gage – Dial/Venier 0-12” 85
    12”-24” 130
    24”-36” 190
    36”-48” 240
A33 Height Gage – Digital 0-12” 160
    12”-24” 240
    24”-36” 300
    36”-48” 350
A34 Height Master Up to 12” 220
A35 Holtest Micrometer Up to 3” 55
    Up to 6” 75
A36 Hole Gage ALL 50
A37 Inclinometer Clinometer 50
A38 Indicator All 28
A39 Keyway Gage All 40
A40 Lead Gage All 55
A41 Lead Sefng Standards All 55
A42 Level Machine 50
    Master 95
    Electronic 225
A43 Load Cells All Call
A44 Manometer ALL 85
A45 Measuring Tape Up to 25’ 38
    Over 25’ 48
A46 Miracle Point   40
A47 Micrometer  (Internal Diameter) 1 ½”- 8“ 70
    1 ½”-12” 85
    4”-24” 95
    8”-20” 95
    1 ½” -32” 95
    4”-40” 95
    6”-36” 95
    8-80 150
    32-57 115
    2-40” 115
    36-108” 195
    6”-60” 115
  Rods Each 7
  Anvils Each 7
  Spacers Each 4
  **Standards not included** 0-3” 70
    0-4” 70
    0-6” 70
    6”-12” 75
    12”-18” 80
    16”-20” 90
    18”-24” 115
    24”-30” 120
    30”-36” 150
    36”-42” 180
    42”-48” 180
A48 Micrometer OD/Blade Mics 0-3” 30
    3-6” 40
  1” Interval only 13”-24” 60
  **Standards not included** 25”-36” 80
  Micrometers  Standards Up to 6” 12
    7” and up 1.20 per inch
    12”-32” 252
    36-41” 272
A49 Mic Master Up to 6” 150
    Up to 12” 240
A50 MRP –Pitch Diameter/Quality  Gages All 70
A51 MRP-Standards All 60
A52 NPT Plugs <1” 55
    2”-3.5” 65
    4”-12” 75
A53 OpAcal Flat Up to 3” 60
    Up to 6” 95
A54 Parallels Parallel Gage 60
A55 Pin Gages All 2 per pin
A56 Pit Depth Gage All 30
A57 Pi Tape All 55
A58 PipeZe All 195
A59 Precision Angles All 30
A60 PI Tape All 55
A61 Profile Gage All 45
A62 Profilometer All 140
A63 Protractor All 40
A64 Pull Gage Up to 50lb 60
A65 Radius Gage Per Leaf 3.50
A66 Ring Gages (Plain) Up to 2” 30
    Up to 4” 35
    Up to 6” 40
    Up to 8” 45
    9” and above 65
A67 Ring Gage – Threaded (API) <1.5” 40
    Up to 2” 45
    Up to 4” 50
    Up to 6” 55
    Up to 8” 65
    9” and above 85
    Most Unified 2A Rings 45
A68 Riser Block All 70
A69 Rules/Scales-Steel 0-24” 40
    24”-48” 45
    48”-60” 60
    Above 60” 70
A70 Run-Out Gages All 50
A71 Scales – Mass Up to 50lb 80
    Above 50lbs Call
A72 Shallow Gage All 50
A73 Snap Gages All 50
A74 Strain Guage All 75
A75 Stage micrometer All 120
A76 Step Block All 65
A77 Straight Edge 60-72” 105
A78 Stroboscopes Need Make and Model Call
A79 Squares Up to 12” 60
    Up to 18” 80
    Up to 24” 105
A80 Surface Standard   120
A81 Surface Roughness Gage Profilometer 140
A82 Surface  Roughness Standard Single Patch 120
A83 Tachometer All 100
A84 Tape Measure Up to 50m 50
    Up to 100m 100
    Up to 200m 150
A85 Taper Guage All 65
A86 Telescoping Gage All 20
A87 Tensiometer Aka Tensile Strength Gage 185
    Infrared 90.00
A88 Thickness Gage (CoaAng) Ultrasonic 150.00
    Per leafs (min 50) 2.5 per leaf
A89 Thread Height Gage All 35.00
A90 Thread Height Standard All 45.00
A91 Thread Plugs Unified Go/NoGo 30 per member
A92 Thread Rolls All 75
A93 Thread Wires Per Pitch 15
A94 Timer/Stopwatch All 60
A95 Thread  micrometer All 35
A96 V-Block All 75
A97 Viscometer Need Make and Model Call for Quotes
A98 Weights All Call for Quotes

Join Newsletter

By subscribing to our mailing list you will always be update with the latest news from.
Don't worry, we hate spam!