SKU Equipment Description Price ($)
A1 AGD Indicators Up to 1” travel 25
    Up to 3” 35
    Up to 5” 55
A2 Angle Blocks All 18
A3 1-2-3 Blocks All 30
A4 Angle Plates 8”- 12” 50
    12”- 18” 65
A5 Ball Gage Set Per Pair 55
A6 Bench Micrometer All 180
A7 Bore Gage Dial/ Digital Up to 8” 60
    9”-14” 65
A8 Bore Head   30
A9 Bore Gun   45
A10 Caliper (Dial) 0- 12” 25
    12”- 24” 65
    24”- 40” 90
    40”- 60” 140
    60”-80” 175
    80”-120” 190
A11 Caliper (Digital) 0- 12” 30
    12”- 24” 70
    24”- 40” 95
    40”- 60” 145
    60”-80” 180
    80”-120” 195
A12 Caliper Gage All 65
A13 Caliper/Depth/Mic  Master Per Reading 15
A14 Center finder All 40
A15 Centrifuge All 150
A16 Chart Recorder Temperature 120
    Temp/Humidity 180
    Pressure 120
    Temp/Pressure 180
A17 Chamfer Gage All 55
A17B Coax Indicator All 40
A18 Crimping tool Crimper 65
A19 Cylindrical Plugs Up to 4” 45
    Up to 8” 75
    9” and higher 90
A20 Cylindrical Plugs Up to 2” 30
    3” to 4” 35
    5” to 6” 40
    7” to 8” 75
    9” and up 90
A21 Depth Micrometer 0-1” 30
    0-4” 60
    0-6” 80
    0-9” 95
    0-12” 105
A22 Depth Gage (Bu^ress/Thread/API) 0 - 12” 30
    12” - 24” 35
    24” – 36” 45
A23 Deflectometer All Call
A24 Dial Indicators All 28
A25 Dial Caliper Gage – Frog Legs All 35
A26 Durometer ALL 95
A27 Feeler/Filet/Axle  Gage Per Leaf 4
A27B Flaw Detectors Ultrasonic 185
  Force Gage All 60
A28 Gage Blocks Minimum Set 60
    Per Block 4.50
    5-20” Long set 310
    36 pc. Set 162.00
    81 pc. Set 364.5
A29 Gauss Meter/Magnetometer 10, 20 & 50 55
A30 Groove Gage Up to 6” 30
    Up to 24” 35
    Up to 30” 45
A31 Hardness Tester Brinell 250
    Rockwell 250
    Equidp/hardp 300
A32 Height Gage – Dial/Venier 0-12” 85
    12”-24” 130
    24”-36” 190
    36”-48” 240
A33 Height Gage – Digital 0-12” 160
    12”-24” 240
    24”-36” 300
    36”-48” 350
A34 Height Master Up to 12” 220
A35 Holtest Micrometer Up to 3” 55
    Up to 6” 75
A36 Hole Gage ALL 50
A37 Inclinometer Clinometer 50
A38 Indicator All 28
A39 Keyway Gage All 40
A40 Lead Gage All 55
A41 Lead Sefng Standards All 55
A42 Level Machine 50
    Master 95
    Electronic 225
A43 Load Cells All Call
A44 Manometer ALL 85
A45 Measuring Tape Up to 25’ 38
    Over 25’ 48
A46 Miracle Point   40
A47 Micrometer  (Internal Diameter) 1 ½”- 8“ 70
    1 ½”-12” 85
    4”-24” 95
    8”-20” 95
    1 ½” -32” 95
    4”-40” 95
    6”-36” 95
    8-80 150
    32-57 115
    2-40” 115
    36-108” 195
    6”-60” 115
  Rods Each 7
  Anvils Each 7
  Spacers Each 4
  **Standards not included** 0-3” 70
    0-4” 70
    0-6” 70
    6”-12” 75
    12”-18” 80
    16”-20” 90
    18”-24” 115
    24”-30” 120
    30”-36” 150
    36”-42” 180
    42”-48” 180
A48 Micrometer OD/Blade Mics 0-3” 30
    3-6” 40
  1” Interval only 13”-24” 60
  **Standards not included** 25”-36” 80
  Micrometers  Standards Up to 6” 12
    7” and up 1.20 per inch
    12”-32” 252
    36-41” 272
A49 Mic Master Up to 6” 150
    Up to 12” 240
A50 MRP –Pitch Diameter/Quality  Gages All 70
A51 MRP-Standards All 60
A52 NPT Plugs <1” 55
    2”-3.5” 65
    4”-12” 75
A53 OpAcal Flat   60
      95
A54 Parallels   60
A55 Pin Gages   2 per pin
A56 Pit Depth Gage   30
A57 Pi Tape   55
A58 PipeZe   195
A59 Precision Angles   30
A60 PI Tape   55
A61 Profile Gage   45
A62 Profilometer   140
A63 Protractor   40
A64 Pull Gage   60
A65 Radius Gage   3.50
A66 Ring Gages (Plain)   30
      35
      40
      45
      65
A67 Ring Gage – Threaded (API)   40
      45
      50
      55
      65
      85
      45
A68 Riser Block   70
A69 Rules/Scales-Steel   40
      45
      60
      70
A70 Run-Out Gages   50
A71 Scales – Mass   80
      Call
A72 Shallow Gage   50
A73 Snap Gages   50
A74 Strain Guage   75
A75 Stage micrometer   120
A76 Step Block   65
A77 Straight Edge   105
A78 Stroboscopes   Call
A79 Squares   60
      80
      105
A80 Surface Standard   120
A81 Surface Roughness Gage   140
A82 Surface  Roughness Standard   120
A83 Tachometer   100
A84 Tape Measure   50
      100
      150
A85 Taper Guage   65
A86 Telescoping Gage   20
A87 Tensiometer   185
      90.00
A88 Thickness Gage (CoaAng)   150.00
      2.5 per leaf
A89 Thread Height Gage   35.00
A90 Thread Height Standard   45.00
A91 Thread Plugs   30 per member
A92 Thread Rolls   75
A93 Thread Wires   15
A94 Timer/Stopwatch   60
A95 Thread  micrometer   35
A96 V-Block   75
A97 Viscometer   Call for Quotes
A98 Weights   Call for Quotes
B1 AC Power Supply All models 45
B2 Ammeter All models 75
B3 Clampmeter All models 90
B3 Condnuity  Testers All models 240
B4 Current Calibrator All 240
B5 Current Shunt ALL 140
B6 Data Loggers Electronic 185
B7 DC Power Supply All 95
B8 Decade Boxes    
B9 Digital  Muldmeters (DMM) 3.5 Digit Muldmeters 65
    4.5 Digit Muldmeters 75
    5.5 Digit Muldmeters 85
    6.5 Digit Muldmeters 95
    7.5 Digit Muldmeters 150
    8.5 Digit Muldmeters 200
B10 Electronic Load All 90
B11 ESD Tester All models 85
B12 Flicker Meters   150
B13 Frequency  Counter   90
B14 Funcdon  Generator   125
B15 Ground Bond Tester   240
B16 Harmonic Analyzer   240
B17 Hipot Insuladon Tester Typical 5KVAC Hipot 240
B18 LCR Meters   250
B19 Leakage Current Tester   240
B20 Light Meter   250
B21 Loop Impedance Tester   250
B22 Megger   85
B23 Megohm meter All 95
B24 Oscilloscopes/Scopemeter 100MHz Sampling 160
    200MHz Sampling 170
    500MHz Sampling 195
    600MHz Sampling 200
    1.1GHz Sampling 250
    3.2GHz Sampling 275
    6.4GHz Sampling 295
B25 OTDR All 100
B26 Panel Meters All 95
B27 PAT – Portable Appl Tester All 150
B28 Phase Angle meters All 150
B29 Power Analyzers All 150
B30 Power Factor Meters All 150
B31 Power Recorders All 140
B32 Power Meter All 285
B33 Powerdynes All 285
B34 Process Calibrator All 240
B35 Pulse Generator All 195
B36 RCD/GFCI Tester All 95
B37 RF millivolt meters All 95
B38 Soldering Stadon All 240
B39 Spectrum  Analyzers All 285
B40 Sound Level Meter All 195
B41 Vibradon Meters All 185
B42 Viscometers Make and Model Call
B43 Voltmeter All 95
B44 Wa^s Meter All 95
C1 Dewpoint Sensors Any 65
C2 Dewpoint Transmi^er Any 85
C3 Dewpoint Indicator Any 75
C4 Digital  Thermometer Any 65
C5 Dry Block Calibrator Any 80
C6 pH Meter Any 120
C7 Pyrometer Any 85
C8 Psychrometer Any 55
C9 RH Sensor Any 65
C10 RH Transmi^er Any 85
C11 RH Indicator Any 75
C12 RH Recorder Any 105
C13 RTD Calibrator Any 85
C14 Temperature Transmi^er Any 75
C15 Temperature Switch Any 65
C16 Temperature Chart Recorder 2 Pens 130
C17 Thermocouple Any 65
C18 Thermometer Any 85
D1 Backflow guage Vacuum to 150psi 75
D2 Pressure Calibrator E,g, Fluke 718 295
D3 Pressure Guage Vacuum to 5000psi 40
    Up to 10,000psi 45
    Up to 20,000psi 70
    Up to 40,000psi 90
D4 Chart Recorder 1 Pen 105
    2 Pen 145
    3 Pen 185
    4 Pen 225
D5 Pressure Switches Any 115
D6 Pressure Transmi^er Up to 40,000psi 160
D7 Pressure  Transducer Vacuum to 20,000psi 175
    Up to 40,000psi 225
D8 Needle Adjustment Zero 10
    Span 25
E1 Digital Torque Adaptor Any 125
E2 Torque Wrench 0-250m/lbs 50
    Up to 600 m/lbs 65
    Up to 750 m/lbs 90
    Up to 1000 m/lbs 190
    Up to 2000 m/lbs 225
    Up to  2200 m/lbs 250
E3 Torque Muldplier Any 130
E4 Torque Screwdriver Any 45
E5 Torque Tester Any 225
E6 Torque Comparator Any 150
GCC SKU EQUIPMENT DESCRIPTION PRICE ($)
F1 Single Gas Monitor Any 100
F2 4 Gas Monitors O2/CO/H2S/LEL 120
F3 5 Gas or 6 Gas Monitors Any Call
F4 Flaw Detectors Ultrasonic 185
    Eddy Current 160
F5 Ultrasonic Thickness Meter All 150
F6 Ultrasonic Probe All 90
F7 Phased Array Ultrasonic 185
    Eddy Current 160
F8 Magnedc  Fieldmeter Analog Type 120
    Digital 195
F9 MPI Equipment All 160
F10 Tachometer All 100
F11 Porosity/Pin  Hole/Holiday Detector All 65
F12 Light Meter /Photometer White Light & UV 250
F13 Thickness Gage Ultrasonic 150
    Dial  
    Per leaf  
F14 Densitometer Bulbs All 150
F15 Yoke AC 100
    DC 120
F16 Radiometers/Radiadon Survey Mters Any 150
F17 Conducdvity  Meter Meter and Block 250
F18 Dosimeter All 120
F19 Woodpecker All 195
F20 Bond Testers All 295
G1 CMM Manufacturer, Model, Axis Size, Somware, CNC or Manual, Probe Used, Unit Operadonal? Call
G2 Contour Reader PMC or Others Call
G3 ID/OD Comparator All 350
G4 Gagemaker Mictrac 3000 Linear Machine Up to 12” Using Renishaw Laser Master 450
    Up to 24” 650
    Up to 36” 850
    Up to 48” 950
G5 Gagemaker Mictrac 4000 Linear Machines Up to 12” Using Renishaw Laser Master 550
    Up to 24” 850
    Up to 36” 1200
    Up to 48” 1500
G6 Opdcal  Comparators Up to 12” 300
    Up to 14” 350
    Up to 18” 375
    Up to 30” 495
G7 Oven & Oven Controllers Make and Model (Humidity Generator) Call
G8 Surface Analysis Systems Provide Model and Make Call
G9 Surface Plate Up to 24” 195
    Up to 36” 245
    Up to 48” 295
    Up to 60” 350
    Above 60” Call for Quote
G10 Weighing Scales Weight Scales  
G11 Welders (MIG, TIG) Welding Machines 150
G12 Onsite Fees Applies to ALL Onsite within Houston Area ONLY. 300